Cold Plunge

Cold Plunge
Details:
Our hot and cold plunge is specifically designed for athletes, fitness enthusiasts, and wellness lovers to relieve body inflammation and pain. It combines the muscle - calming effect of cold water immersion with the soothing function of hot water through two separate hot and cold water zones, helping you improve blood circulation and restore your body's vitality.
Send Inquiry
Description
Send Inquiry

Products Description

 

 

Our hot and cold plunge is specifically designed for athletes, fitness enthusiasts, and wellness lovers to relieve body inflammation and pain. It combines the muscle - calming effect of cold water immersion with the soothing function of hot water through two separate hot and cold water zones, helping you improve blood circulation and restore your body's vitality.

 

In addition, we use acrylic material that is corrosion - resistant, resistant to UV damage, and wear - resistant to manufacture it. The plunge is also equipped with anti - slip floor mats, handrails, and ergonomic seats to ensure safety and comfort.

 

In the cold plunge's cold - water bath area, there is a set of advanced inverter chillers. This chiller unit is designed to cool water and works in a similar way to the cooling function of an air conditioner, including:

(1) Heat Absorption:

The warm water in the spa pool is pumped into the chiller unit and flows through the evaporator coils filled with refrigerant. The refrigerant in the coils absorbs the heat from the water to quickly cool the water.

(2) Refrigerant Circulation:

The heated refrigerant gas is compressed by a high - efficiency compressor, generating temperature and pressure, and then enters the condenser coils.

A fan blows ambient air over the coils to dissipate the absorbed heat into the environment.

Finally, the refrigerant cools the hot gas and condenses it into a liquid, passing through an expansion valve to reduce pressure and temperature.

(3) Water Circulation:

The chilled water is pumped back to the spa and continuously circulates in the system to maintain the desired temperature.

Come and experience relaxation and comfort in our cold plunge, and invest in your health today.

 

product-128-128

3 Person

product-128-128

3 Seats

product-128-128

0 Lounger

product-128-128

16 Jets

1

212×211x82 cm

product-128-128

± 960 Kgs

 

image003

 

Product name

Cold plunge

Seats

3

Loungers

0

Dimensions

212×211x82 cm

83.5"x83"x32"

Acrylic shell

Aristech (USA)

Dry weight

280kg (617lbs)

Filled weight

1240kg (2734lbs)

Water capacity

960kg(254gallons)

Total jets

16pcs

Pillow

No

Power

120V, 60HZ/220V-240V,50HZ

Control system

Balboa

Heater

No

Circulation pump

Yes

Pump 1

Inverter Chiller

Pump 2

2hp (2-speed)

Light

12V/12W

Water divert

No

Air regulator

1pc

Filtration system

Single port filter

Frame

Pressured chemical treated wood

Cabinet

Graphite/Red cedar wood

Isolation

HD foam

Base

ABS base

Cover

Maximum Energy Savings 5inch > 3inch

Step

Smart design extra strength

 

 

Custom Cold Plunge

 

 

We produce cold plunges according to your application, target water temperature, installation conditions, and branding requirements.

20+ Years' OEM/ODM Experience

Tub Size & Appearance

We can customize:

  • Tub dimensions, seating capacity, colors, and finishes
  • Covers, steps, and accessory configurations

Cooling & Water System

Configurations can be selected according to:

  • Target water temperature and cooling requirements
  • Chiller, circulation, filtration, and water treatment options

Electrical & Installation Requirements

Configurations can be selected according to:

  • Voltage, frequency, and electrical connections
  • Indoor or outdoor installation, available space, and drainage conditions

OEM/ODM & Branding

We support custom:

  • Product configurations for different applications
  • Logos, labels, user manuals, and export packaging

Provide your application, installation dimensions, target water temperature, electrical supply, required configuration, quantity, and branding requirements for technical evaluation and quotation

Explore Your OEM/ODM Solutions

 

 

Cold Plunge for B2B Applications

 

 

Cold plunges can be configured for residential wellness, fitness and recovery facilities, hospitality projects, and commercial distribution based on usage frequency, installation conditions, and business requirements.

  • Residential & Home Wellness
  • Gyms & Fitness Centers
  • Recovery Studios & Wellness Centers
  • Hotels, Resorts & Spas
  • Importers, Distributors & Private Labels

 

 

Quality Control & Testing for Cold Plunge

 
01/

Cooling Performance Testing

Cooling capacity, temperature control accuracy, cooling time, and temperature recovery are tested under defined water volume and ambient temperature conditions.

02/

Structural & Dimensional Inspection

Tub dimensions, shell integrity, surface finish, insulation, and load-bearing requirements are checked against approved specifications and applicable tolerances.

03/

Water System & Leakage Testing

Plumbing connections, circulation pumps, filtration systems, drainage, and water-contact components are inspected for proper operation, leakage, and material compatibility.

04/

Electrical Safety Inspection

Voltage, frequency, wiring, grounding, leakage protection, controllers, and electrical components are checked against approved specifications and applicable market requirements.

05/

Energy, Installation & Operational Checks

Rated power, ventilation, heat dissipation, noise, drainage, and maintenance access are reviewed against the specified installation conditions and intended operating environment.

06/

Certifications & Market Compliance

Applicable documentation may include CE, ETL, TÜV, RoHS, and SAA-related approvals or conformity documents, alongside ISO 9001 quality management certification, subject to verification for the selected model and destination market.

See Our Quality Control System

Water Leakage Detection
Water Leakage Detection
Pressure Resistance Detection
Pressure Resistance Detection
Fiberglasss Testing
Fiberglasss Testing
Ultrasonic Thickness Gauge
Ultrasonic Thickness Gauge
Blistering Inspection
Blistering Inspection

 

 

Cold Plunge B2B Manufacturing & Supply

 

 

We operate a 60,000 m² factory with automated fiberglass spraying and Italian 5-axis CNC machining. OEM/ODM, private labeling, and bulk orders are supported.

 

MOQ, Bulk Supply & Lead Time

We offer no MOQ for general inquiries; the first dealer order requires 1 FCL. With a monthly production capacity of 2,000–3,000 spa units, typical delivery is 7–30 days, depending on order quantity and customization.

 

Maintenance & After-Sales Support

We provide technical support, maintenance guidance, and after-sales service. Buyers can request spare-parts availability and support arrangements for the selected cold plunge configuration.

 

Warranty Coverage

  • Spa structure: 10-year prorated warranty
  • Spa shell surface: 3-year prorated warranty
  • Jets & spa cover: 2-year warranty
  • Controller & electrical parts: 2-year warranty
  • Spa cabinet: 2-year warranty

 

View Our Manufacturing

Automatic Manufacturing
Automatic Manufacturing
Full Support&Service
Full Support&Service

 

 

FAQ

 

 

Q: What Is the Difference Between a Cold Plunge Tub and an Ice Bath?

A: A cold plunge tub typically uses a chiller to maintain water temperature, while a traditional ice bath relies on manually added ice.

Q: Is a Cold Plunge Suitable for Commercial Gyms and Recovery Studios?

A: Yes, provided the selected model supports the expected user frequency, cleaning procedures, and continuous operating demands of the facility.

Q: Can Multiple Users Share the Same Cold Plunge Tub?

A: Shared use requires an appropriate water treatment and sanitation plan, with cleaning procedures and water-quality monitoring suited to the facility and local requirements.

Q: Does a Cold Plunge Require Dedicated Drainage?

A: A suitable drainage arrangement is recommended to support water changes, routine cleaning, and maintenance, subject to the installation site and local plumbing requirements.

Q: What Should Importers Consider When Selling Cold Plunge Tubs in Different Markets?

A: Importers should evaluate local electrical requirements, applicable product regulations, installation conditions, service capabilities, and customer demand before selecting a model.

Q: How Should a Cold Plunge Be Prepared for Seasonal Outdoor Use?

A: Outdoor units should be protected against local weather conditions, and the water system should be drained or winterized according to the manufacturer`s instructions when freezing temperatures are expected.

 

 

Custom Cold Plunge for Your Project
Send your installation dimensions, indoor or outdoor application, target water temperature, water capacity, cooling performance requirements, electrical supply, chiller and filtration preferences, target market, required configuration, optional functions, quantity, branding and packaging requirements, certification requirements, and delivery schedule to receive a cold plunge quotation matched to your project.

 

 

 

Hot Tags: cold plunge, China cold plunge manufacturers, suppliers, factory

Get Unparalleled Experience and Profits with China's Top Swim Spa Manufacturer

  • Custom design available
  • No MOQ required
  • Delivery within 7-30 days
  • Free 24/7 online consultation
Get A Free Quote