3 Seats Roto Molded Hot Tub

3 Seats Roto Molded Hot Tub
Details:
Dreaming of enjoying a warm and relaxing spa with your family on the patio, balcony, or in your cozy little yard? Then you absolutely must check out our 3 seats roto molded hot tub​. It has the capacity to comfortably accommodate 2 - 3 adults and comes equipped with a hydro - massage recliner and two massage seats.
Send Inquiry
Description
Send Inquiry

Products Description

 

 

Dreaming of enjoying a warm and relaxing spa with your family on the patio, balcony, or in your cozy little yard? Then you absolutely must check out our 3 seats roto molded hot tub​. It has the capacity to comfortably accommodate 2 - 3 adults and comes equipped with a hydro - massage recliner and two massage seats.

 

Furthermore, this 3 seats roto molded hot tub features a smooth, crack - resistant surface. Its design is simple yet exudes an elegant aesthetic. Cause it is manufactured using roto - molding technology, where the plastic resin LLDPE is heated and rotated within a mold to form a seamless, one - piece tub structure.

 

The 3 seats roto molded hot tub​ boasts a triple - layer insulation design, including accessories such as low - density foam spray, an insulated cabinet, and an insulated safety cover to safeguard against scalding from high temperatures. And you can customize the jet intensity, angle, and temperature of the water, according to your personal preferences for the most comfortable experience.

 

product-128-128

3 Person

product-128-128

2 Seats

product-128-128

1 Lounger

product-128-128

18 Jets

1

200x150x76 cm

product-128-128

± 640 Kgs

 

image003

 

Product name

3 seats roto molded hot tub

Seats

2

Loungers

1

Dimensions

200x150x76 cm

79"x59"x30"

Acrylic shell

Aristech (USA)

Dry weight

150kg (331lbs)

Filled weight

790kg (1742lbs)

Water capacity

640kg(169gallons)

Total jets

18pcs

Pillow

1pc

Power

120V, 60HZ/220V-240V,50HZ

Control system

Balboa

Heater

2kw/1.5kw

Circulation pump

No

Pump 1

2HP(2-speed)

Light

12V/12W

Water divert

No

Air regulator

1pc

Filtration system

Floating filter

Frame

Roto mould

Cabinet

Graphite

Isolation

Full foam

Base

ABS base

Cover

Maximum Energy Savings 5inch > 3inch

Step

Smart design extra strength

 

 

Custom 3 Seats Roto Molded Hot Tub

 

 

We produce 3 seats roto molded hot tub solutions based on your application, installation conditions, target market, and approved product requirements.

20+ Years' OEM/ODM Experience

Spa Configuration

We can customize:

  • 3-person seating or seat-and-lounger configuration
  • Jet quantity, type, and positioning
  • Pump and heating configuration
  • Filtration and water circulation
  • Control panel and operating functions
  • LED lighting and selected accessories

Configuration can be selected according to your application, available space, and end-user requirements.

Size & Installation

You can provide:

  • Overall length, width, and height
  • Available installation space
  • Seating and internal space requirements
  • Equipment and maintenance clearance
  • Foundation and drainage conditions

We can evaluate these conditions to confirm the suitable product configuration for your project.

Shell & Cabinet Appearance

We support custom:

  • Shell color and finish
  • Cabinet color and appearance
  • Exterior design details
  • Product trim and selected accessories
  • Brand-specific appearance requirements

Appearance specifications can be confirmed through drawings, samples, or approved color references.

Electrical & Functional Configuration

Depending on the target market and selected model, we can customize:

  • Voltage and frequency
  • Plug or electrical connection
  • Heater configuration
  • Pump operation
  • Control system
  • Selected user functions

Electrical requirements can be confirmed according to local installation conditions and destination-market requirements.

Branding & Private Label

You can provide:

  • Customer logo
  • Product name and model number
  • Brand labels
  • Private-label packaging
  • User manuals and product information

We can apply approved branding and labeling requirements to the specified product configuration.

Packaging & Documentation

We can customize:

  • Export packaging
  • Product labels
  • Carton and shipping marks
  • User manuals
  • Product documentation
  • Private-label packaging

Packaging and documentation requirements can be confirmed according to the destination market and transportation arrangement.

Sample Approval

Samples or approved configurations can be used to confirm:

  • Product dimensions and appearance
  • Seating and jet configuration
  • Electrical and functional requirements
  • Branding and labeling
  • Packaging specifications

Approved sample details can serve as the reference for subsequent production.

OEM Service

We support custom:

  • Spa size and seating configuration
  • Jets, pumps, heating, and filtration
  • Electrical and control requirements
  • Shell and cabinet appearance
  • Logos, labels, and model numbers
  • Packaging and product documentation
  • OEM production for specific markets and applications

Explore Your OEM/ODM Solutions

 

 

3 Seats Roto Molded Hot Tub for B2B Applications

 

 

This 3 seats roto molded hot tub can be configured for residential, hospitality, rental, and small commercial projects, with the final suitability depending on the intended application and site conditions.

  • Residential Backyard & Patio
  • Vacation Rental & Airbnb
  • Hotel & Resort
  • Small Commercial Wellness
  • Indoor & Outdoor Projects

 

 

Quality Control & Testing for 3 Seats Roto Molded Hot Tub

 
01/

Dimensional & Structural Inspection

Overall dimensions, seating configuration, base footprint, equipment openings, access panels, and structural components are inspected against approved drawings, specifications, and applicable tolerances.

02/

Load & Installation Inspection

Dry weight, filled weight, load-bearing components, foundation requirements, drainage interfaces, installation clearances, and maintenance access are checked against the approved configuration and project conditions.

03/

Hydrotherapy Performance Testing

Jet quantity, type, positioning, pump operation, water flow, pressure, control response, and configured hydrotherapy functions are tested against approved specifications and performance requirements.

04/

Heating & Temperature Testing

Heater operation, temperature control, heating performance, insulation, thermal cover, and heat-retention performance are checked against the approved heating configuration and applicable operating conditions.

05/

Water Management & Leakage Inspection

Filtration, circulation, filter access, plumbing connections, seals, joints, drainage components, water flow, and leakage are inspected and tested for proper operation.

06/

Electrical Safety Inspection

Voltage, frequency, wiring, grounding, electrical connections, protection components, controls, and other electrical requirements are inspected according to the approved configuration and applicable safety requirements.

07/

Serviceability & Spare Parts Inspection

Pump, heater, controller, filter, jets, cover, plumbing components, equipment access, and replacement interfaces are checked for proper operation, maintenance access, and compatibility with the approved configuration.

08/

Shell, Cabinet & Appearance Inspection

Shell surfaces, cabinet panels, base components, finishes, joints, labels, and visible assembly details are inspected for defects and conformity with approved appearance requirements.

09/

Certification & Compliance Inspection

CE, ETL, TUV, RoHS, NSW, and SAA requirements are verified against the approved product configuration and applicable destination-market requirements.

10/

Functional & Batch Consistency Inspection

Key dimensions, configured components, electrical performance, hydrotherapy functions, appearance, and other critical characteristics are compared with approved samples or specifications to maintain consistency across production and repeat orders.

11/

Warranty & Lifecycle Verification

Warranty coverage, replacement components, technical support requirements, model continuity, and future replacement compatibility are reviewed against the approved product configuration and supply requirements.

See Our Quality Control System

Water Leakage Detection
Water Leakage Detection
Pressure Resistance Detection
Pressure Resistance Detection
Fiberglasss Testing
Fiberglasss Testing
Ultrasonic Thickness Gauge
Ultrasonic Thickness Gauge
Blistering Inspection
Blistering Inspection

 

 

3 Seats Roto Molded Hot Tub B2B Manufacturing & Supply

 

 

Manufacturing Capacity

Bestview Spa operates a 60,000 m² manufacturing base with 30+ production equipment and 150+ employees, supporting a monthly output of approximately 2,000–3,000 hot tubs and swimming spas.

 

Bulk Production

Roto molded hot tubs are produced through mold design and manufacturing, LLDPE material preparation, roto-molding, cooling and demoulding, quality inspection, and post-processing before packaging and warehouse storage.

 

MOQ & Lead Time

No MOQ is required for hot tub orders, and Bestview Spa states a typical delivery time of 7–30 days depending on the order and product requirements.

 

Packaging & Transit Protection

Passed products are packaged and stored for shipment, with packaging and transportation arranged according to export and customer requirements to support safe international delivery.

 

Container Loading & Shipping

We operate a dedicated packing and loading workshop and coordinates transportation and shipping schedules according to customer delivery requirements.

 

Warranty & After-Sales

After-sales coverage includes 10 years for the spa structure, 3 years for the shell surface, and 2 years for the jets, cover, controller, electrical components, and cabinet.

 

View Our Manufacturing

Automatic Manufacturing
Automatic Manufacturing
Full Support&Service
Full Support&Service

 

 

FAQ

 

 

Q: What is a 3-person roto molded hot tub made of?

A: A roto molded hot tub typically uses rotationally molded polyethylene to form a durable, seamless spa shell suitable for residential and commercial applications.

Q: How long can a roto molded hot tub typically last?

A: Service life depends on material quality, operating frequency, water treatment, climate exposure, and maintenance practices rather than seating capacity alone.

Q: Is a 3-person hot tub suitable for a small deck?

A: It can be suitable for a properly engineered deck when the structure can support the filled spa weight and the installation meets applicable load, drainage, and electrical requirements.

Q: Can a 3-person hot tub be used for daily commercial operation?

A: Yes, it can be considered for frequent commercial use when the selected configuration, equipment, maintenance plan, and operating conditions are matched to the expected usage level.

Q: How often should hot tub filters be replaced?

A: Filter replacement frequency depends on water quality, bather load, cleaning frequency, and the specific filter system used in the selected configuration.

Q: What affects the electricity consumption of a 3-person hot tub?

A: Energy consumption is mainly affected by heater power, water temperature, insulation, ambient conditions, usage frequency, cover performance, and heating cycles.

Q: Can a roto molded hot tub be installed on a rooftop?

A: Rooftop installation requires project-specific structural assessment, waterproofing, drainage, access, and electrical planning before the spa configuration can be approved.

Q: What should I check before importing a 3-person hot tub?

A: Import buyers should confirm destination-market electrical requirements, required product certifications, packaging and shipping dimensions, customs documentation, warranty coverage, and after-sales support before placing an order.

 

 

Custom 3 Seats Roto Molded Hot Tub for Your Project
Send your installation dimensions and clearance requirements, indoor or outdoor application, electrical supply and frequency, target market, seating and jet configuration, heating and filtration requirements, optional functions, order quantity, branding and packaging requirements, required certification documents, and delivery schedule to receive a 3 seats roto molded hot tub quotation matched to your project.

 

 

 

Hot Tags: 3 seats roto molded hot tub, China 3 seats roto molded hot tub manufacturers, suppliers, factory

Get Unparalleled Experience and Profits with China's Top Swim Spa Manufacturer

  • Custom design available
  • No MOQ required
  • Delivery within 7-30 days
  • Free 24/7 online consultation
Get A Free Quote